Why the shrinking machine can not rise to a higher temperature?
- Share
- Issue Time
- 06-15-2019

What is the reason the heat shrinking machine does not rise to a higher temperature or rise slowly ?
What is the reason the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 ℃)?
Answer: The heater's line is that the main power line passes through a power switch and then to the electric heating tube. Therefore, it is necessary to first check whether the contacts of the power switch are normal. The above phenomenon occurs if the line does not pass one of the phases. If the power switch is normal, you can check the meter again to see if the ohm values of each phase are the same as the machine. If it is normal, it should be a short circuit. If the phases are all connected but the line or the heating tube is still abnormal, the heater needs to be replaced.
Max film width | 590mm |
Packing Speed
|
30-180bags/min
|
Packing material
|
PVC、POF、 PE Heat shrinkable film
|
Power Consumption of Packing machine | 4.7KW single phase 220V |
Power Consumption of shrink machine | 16.3KW 380V |
Dimension of Packing machine | 5700×1250mm×1800mm |
Dimension of shrink machine
|
2400×600mm×530mm
|
Weight | About 1500kg |